No. 9, Jalan Intan 2/7, Taman Puchong Intan, 47150, Puchong, Selangor, Malaysia
|Coil:||Special Copper Wire ( H class)|
|Plug:||NBR (Viton, Silicone, PTFE)|
|Valve body:||Forges Brass|
• UD series is direct-acting, conductive, and normally closed (NC) 2/2 way solenoid valve.
• Able to operate under no differential pressure
• Applied fluid type :water, air, light oil, gas, vacuum
• Acceptable for customization: Viton (130'C) , Silicone (130'C) and EPDM (130'C) for seal plug
• Before pipelining, the pipe line must be very clean without any contaminants or impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
Not Suitalbe For Fluid As Below:
• Liquid status when it is in high temperature; solid status when it is in low temperature.
• Corrosive fluid
• Viscosity over 20cst