03-8060 5700

No. 9, Jalan Intan 2/7, Taman Puchong Intan, 47150, Puchong, Selangor, Malaysia


  • UA-8~10
  • UA-8~10
Brand: mit-UNID-cns
Coil: Special copper wire (H class)
Tube: Stainless steel
Spring: Stainless steel
Core: Stainless steel
Plug: NBR (Viton, Silicone, PTFE)
O-ring: NBR (PTFE)
Valve body: Forged Brass


• UA series is direct-acting, conductive, and normally closed (NC) 3/2 way solenoid valve.
• Applied fluid type : water, air, vacuum
• Able to operate under no differential pressure
• Applied to the equipment need to exhaust after power-off.
• Acceptable for customization : Viton (130"() for seal plug
• Before pipelining, the pipe line must be very clean without any contaminants or impurity.
• To extend the lifetime, Y-line filter should be installed in the front end of solenoid valve.
• AC voltage tolerance: ± 10%; DC voltage tolerance: ± 1%
• It should be installed horizontally; vertical installation is not advisable.
Not Suitalbe For Fluid As Below:
• Liquid status when it is in high temperature; solid status when it is in low temperature.
• Corrosive fluid
• Viscosity over 20cst

You may also like

Business Hours

  •  Mon-Fri
    08:30 AM-05:30 PM

Contact Us