Electromagnetic flow meters | Sure Instrument

Electromagnetic flow meters are intended for fluid measurement in most industries including water, wastewater, food and beverage, pharmaceutical and chemical.

There are two basic components of electromagnetic flow meter: 1) The Detector, which includes the flow tube, isolating liner and measuring electrodes, and 2) The Converter, which is the electronic device responsible for signal processing, flow calculation, display and output signals.

The materials of construction of the wetted parts (liner and electrodes) should be appropriate for the specifications on the intended type of service. Review of the compatibilities consistent with the specifications is recommended.

Our electromagnetic flow meters are factory tested and calibrated. A calibration certificate is included in the shipment of each meter.

DESCRIPTION

The magnetic flow meter is one of the most flexible and universally applicable flow measurement systems available.
It is a volumetric flow meter which does not have any moving parts and is ideal for waste water applications or any dirty liquid which is conductive or water based.
Magnetic flow meter is also ideal for the applications where low pressuredrop and low maintenance are required.

OPERATING PRINCIPLE
Following Faraday’s law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field.
In the electromagnetic measuring principle, the following medium is the moving conductor The voltage induced is proportional to the flow velocity and is upplied to the amplifier by means of two measuring electrodes.
The flow volume is calculated by means of the pipe cross section area.

APPLICATION
–Waster water industry: transport networks sewage treatment plants, sludges
–Chemical industry: acids alkalis, dosing applications, abrasive or corrosive mediums
-Metal & mining industry: mediums with a high solid content, like ore or excavator mud
–Water industry: Revenue metering, district metering waterabstraction, leakage detection
–Pulp & paper industry: pulp, pastes, sludges & other caustic mediums, liquor, additives, bleaches, colourants
–Food & beverage industry: mixing, dosing and filling of drinks under hygienic conditions filling systems applications
Category:
TECHNICAL DATA
Certificates IS09001:200; CE
Diameter PTFE:DN6-DN600 Hard ruber: ON50-DN2200

Sanitary Type: DN10-DN100; Insertion Type: DN200-DN3000
Flow Direction Positive; Negative
Repeatability Error  

±0.1%
Accuracy ±0.5% of rate; ±0.2% of rate
Medium Temperature  

Hard rubber liner:-20 …+60℃

High-temp rubber liner:-20…+90℃

PTFE liner: -20…+120℃

High-temp PTFE liner: -2O…+ 16O℃

PFA: -20 …+180℃
Nominal WorkingPressure  

DN10-DN25≤M4.0Mpa

DN32-DN150≤l.6Mpa

DN200-DN60≤1.0Mpa

DN700-DN2200≤0.6Mpa
Velocity 0.3-10m/s
Ambient Temperature  

-20 …+60 *C
Relative Humidity 95%
Comsumed Power  

<20W
MODEL SELECTION
Model Suffix Code Description
LDG- 1 2 3  4 5 6 7 8 Electromagnetic Flowmeter
Type B Btyps
T T type( DN15- DNIOOonly)
F Ftype
Y Y type
Diameter XXXX Stand for diameter
0004: DN4: 0015: DN15
0100: DN100; 2200: DN2200
Structure S Compact Type with local display
L Remote Type; 10 meters cable default
Electrode Material M SS316L
T Titanium
D Tantalum
H Hastelloy AlloyC
P Platinum-lridlum
Signal Output 0 No Output
1 4-20mA / Pulse
Liner Material X Hard Rubber
p Propylene Oxide
F PTFE
A PFA
Power Supply -0 110-240VAC
-1 24V DC (20-36V DC)
-2 Battery Power Supply
Communication 0 No Communication
1 ModbusRS485
2 HART
3 GPRS
4 ProfibusDP
SensorGrounding 0 No Grounding
1 Grounding Ring
2 Grounding Electrode
Connection DXX D16:DIN PN16 Flange; D25: DIN PN25 Flange.
AXX A15: ANSI150# Flange; A30: ANSI 300# Flange.
JXX J10: JIS 10K Flange; J20: JIS20K Flange.
XXX On request
Body Material Cs
S4		 Carbon Steel
Stainless Stool 304
SANITARY TYPE MODEL SELECTION
Model Stuffix Code Description
LDGS- 1 2 3 4 5 -6 7 8 9 11 Sanitary Magnetic Flowmeter
Diameter xxxx Stand for diameter
0010:DN10
0100:DN100
Structure S Compact type with local display
L Remote Type: 10 meters cable default
Electrode Material M SS316L
T Titanium
D Tantalum
H Hastelloy Alloy C
P Platinum-Iridium
Signal Output 0 No Output
1 4-20mA / Pulse
Liner Material F PTFE
A PFA
Power Supply 0 110-240V AC
-1 24V DC
-2 Battary Power Supply
Communication 0 No Communication
1 Modbus RS485
2 HART
3 GPRS
4 Profibus-DP
Sensor Grounding 0 No Grounding
1 Grounding Ring
2 Grounding Electrode
Connection TRC Tri-clamp for sanitary connection
Body Material S4 Stainless Steel 304
SANITARY TYPE MODEL SELECTION

Model Selection

Model Suffix Code Description
LDGC- ① ② ③ ④ -⑤ ⑥ ⑦ Insertion Magnetic Flowmeter
Diameter ×××× Stand for diameter
0200:DN200
3000:DN3000
Structure S Compact type with local display
L Remote type with 10 meters cable
Electrode Material M SS316L
T Titanium
D Tantalium
H Hastelloy Alloy C
P Platinum-Iridium
Signal output 0 No Output
1 4-20mA / Pulse
Power Supply -0 110-240V AC
-1 24V DC (20-36V DC)
-2 Battery Power Supply
Communication 0 No Communication
1 Modbus RS485
2 Hart
3 GPRS
4 Profibus DP
Connection S Simple Type
B Ball Valve Type

 

 

Reviews

There are no reviews yet.

Be the first to review “Electromagnetic flow meters | Sure Instrument”

Your email address will not be published. Required fields are marked *

Related products